Differences

This shows you the differences between two versions of the page.

--- engine_details:fasteners [2020/04/08 16:43] – ben
+++ engine_details:fasteners [2023/10/30 23:27] (current) – ben
@@ Line 21: / Line 21: @@
 |Pressure plate to Flywheel (manual trans only)|''M8x1.25 @ 22mm (6)'' |
 |Oil level sensor thread size|''M20x1.5'' |
-|Bellhousing bolts|''M12x1.75 @ ??'' |
+|Bellhousing bolts|''M12x1.75 @ 45mm'' |
 === Heads ===
@@ Line 43: / Line 43: @@
 |Vac Tee to SC|''M8x1.25 @ 20mm (2)'' |
 |Fuel rail to SC|''M8x1.25 @ 10mm (1)'' |
+|Fuel rail to Intake|''M6x1 nut (4) and stud'' |
 |Thermostat cover|''M8x1.25 @ 30mm (2)'' |
@@ Line 52: / Line 53: @@
 |Cam sensor bolt|''1/4-20 @ 5/8" (1)'' |
 |MAP sensor|''M5x0.8 @ 30mm (2 or 4)'' |
+|Starter solenoid enable nut|M5x0.8 nut|
 === Other Accessories ===
@@ Line 71: / Line 73: @@
 Most, if not all of this information has been gathered from [[http://www.pontiacbonnevilleclub.com/forum/viewtopic.php?f=8&t=44480&view=previous|Mattstrike's post on PBC]]
-\\