Differences

This shows you the differences between two versions of the page.

--- performance:ignition [2020/05/07 16:07] – ben
+++ performance:ignition [2022/10/19 21:22] (current) – ben
@@ Line 1: / Line 1: @@
 ====== Ignition Mods ======
-With the factory PCM options are a bit limited in what can be done for ignition system improvements.
+With the factory PCM options are a bit limited in what can be done for ignition system improvements. Switching to an aftermarket ECU opens up the doors to almost anything you could ever want to do, but this page is just about what can be done using the factory PCM.
 The 3800 uses a waste spark ignition system where two cylinders each share one coil. Because of this your coil options are a bit limited unless you want to perform surgery on your ignition control module.
@@ Line 44: / Line 44: @@
 {{:performance:0921e8e15b5555a77e9002f024f171cc.png}}
+To make this work with the ICM in these cars you will need modify the ICM and separate the coil power from the power leading to the rest of the module. The ICM module itself needs to have power all of the time while the car is running, you can't pulse power to it or you will see all sorts of crazy ignition behaviour.
+Some homework will need to be done when you dissect your ICM and determine which pin receives 12v. You could do this with a multimeter and probe the leads that lead down into the chips themselves or if your ICM looks like this one you could just do the same thing that was done here.
+The 12v power wire is shown as red in this image. The idea is to provide separate power sources to the coils and the ICM circuits so you can pulse or cut power to the coils while the rest of the ICM still has 12v:
+{{https://i.imgur.com/bIrJOWl.jpg?nolink&|bIrJOWl.jpg}}
+{{https://i.imgur.com/linL1Il.jpg?nolink&|linL1Il.jpg}}
+Seal it back up with waterproof RTV or something and make sure the new wire always has 12v with the ignition in "run" and "start". Then feed the old wire power from the WOT box
+{{https://i.imgur.com/ZJmlS3L.jpg?nolink&|ZJmlS3L.jpg}}