Differences

This shows you the differences between two versions of the page.

--- transmissions:aftermarket:fwd_muncie [2020/03/27 00:50] – created ben
+++ transmissions:aftermarket:fwd_muncie [2020/05/06 19:53] (current) – [How to make it work] ben
@@ Line 1: / Line 1: @@
 ====== Muncie 4 speed (Fiero) ======
+===== General Info =====
+Not to be confused with the RWD Muncie 4 speed, the transverse Muncie is quite a bit different and not nearly as strong.
+Early Fiero's could be optioned with a 4 speed manual transmission. This is the Muncie 4 speed referred to here on this page.
+These transmissions came with two different gear ratio options. These options were either 4.10 or 3.65 gear ratios. There were also some equipped with 3.33 gears but these are less common.
+===== Strength =====
+This transmission could be found in cars with 4 cylinder engines as well as v6's. The v6 version has a slightly stronger case than the 4 cylinder version.
+Your results may vary but there are a few people who have had pretty good luck with this transmission with power levels of around 300 wheel horsepower. Typically the biggest issues are either the case breaking, 3rd gear getting stripped, or a twisted differential.
+===== How to make it work =====
+Use this information at your own risk, this may be incomplete or lacking in some areas
+----
+The bellhousing will bolt right up to the 3800, but you will need a flywheel from a manual f-body 3800 and a clutch to send power through it.