Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 127.0.0.1,216.73.216.24
Lock expires at: 2026/04/04 03:19 (15 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Balancers ======

There were 3 main harmonic balancer designs used on the 3800

===== L67/L32 Balancer =====

The L67 balancer has 2 sets of belt ribs on it since the supercharger was driven by its own dedicated belt. This extra belt required a longer balancer to allow for it.

{{http://www.3800wiki.com//lib/plugins/ckgedit/fckeditor/userfiles/blink.jpg?nolink&33x34}}

===== L36/L26 balancer =====

The naturally-aspirated engines were only equipped with one set of belt ribs on the balancer because there was no supercharger to drive for these engines.

There were 2 different balancers used on the L36 engines. This is because rear-wheel drive vehicles came with a slightly different balancer than the front wheel drive vehicles.

==== Front wheel drive balancer: ====

{{:engine_details:e7da49abbd875b1844bf77f4856bb41c.png}}

==== Rear Wheel Drive Balancer (F-body) ====

{{https://lh3.googleusercontent.com/proxy/4J1FxuPZFkA6-_AJl9XpbEf6_GemhA9I9NQ1vQGbgQCCDf5FfoU5IoI11XJL2HQStoy1ow9dw35C7ojo1Ilox7l1c_i0Bv298dA1vYdXrAfqMtBgu6imiwjbww?nolink&|Balancer: New vs Old Style on 2000 Camaro? - CamaroZ28.Com Message ...}}{{:engine_details:f24197273563897543c2934b8920816d.png}}