Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 127.0.0.1,216.73.216.24
Lock expires at: 2026/04/04 01:31 (4 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== External Specs ======

This page will focus on the engine block details themselves

===== Differences in blocks =====

All series 2 and series 3 engines share the exact same block. The only real difference is the stamping on the blocks. It doesn't matter if the engine was supercharged, naturally aspirated, or if it was in an f-body car. You can use any heads or any external parts you'd like to on any block.

The only differences are within the engine internals.

You can identify any 3800 block based on a ID casted onto the block itself

{{https://lh3.googleusercontent.com/proxy/vS8hX7jrocW35a7iu5ZQNPfsdaTfA2i1rGUMZKLziRWxHtwantp_AmuChFxYD5NF42FtHd2AMcYcvtyQmmeDWxOsZjg7s0d_C61jEZY?nolink&|3800 Engine VIN number? - Pennock's Fiero Forum}}{{:engine_details:afbde1bf7530bb82659f3fb472efc0b3.png}}


===== Dimensions =====