3800 wiki

Error loading plugin vshare
ParseError: syntax error, unexpected 'fn' (T_STRING), expecting :: (T_PAAMAYIM_NEKUDOTAYIM)
More info is available in the error log.

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

<h3>3800 Series 2/3 engine bolt sizes</h3>
<div class="level3">

</div>

<h4>Block and Timing Cover</h4>
<div class="level4">

<span class='np_break'> </span>
<div class="table sectionedit1"><table class="inline">
	<thead>
	<tr class="row0">
		<th class="leftalign">Location  </th><th class="col1">Thread Size, Length, and count</th>
	</tr>
	</thead>
	<tr class="row1">
		<td class="col0">Main bearing cross-bolts</td><td class="col1"><code>M8x1.25 @ 50mm (6x)</code> </td>
	</tr>
	<tr class="row2">
		<td class="col0">Oil pan to block</td><td class="col1"><code>1/4-20 @ 1" (20x) </code> </td>
	</tr>
	<tr class="row3">
		<td class="col0">Timing cover to block bolts</td><td class="col1"><code>5/16-18 @ 3.125" (6) - - @1.5" (4)</code> </td>
	</tr>
	<tr class="row4">
		<td class="col0">A/C bracket and RWD Motor mount bolts</td><td class="col1"><code>M12x1.75 @ 35mm (3)</code> </td>
	</tr>
	<tr class="row5">
		<td class="col0">Starter motor</td><td class="col1"><code>M10x1.5 @ 50mm (1) - - @ 115mm (1)</code> </td>
	</tr>
	<tr class="row6">
		<td class="col0">Battery cable to block</td><td class="col1"><code>M10x1.5 @ 20mm (1)</code> </td>
	</tr>
	<tr class="row7">
		<td class="col0">EGR to block</td><td class="col1"><code>3/8-16 @ 1" (2)</code> </td>
	</tr>
	<tr class="row8">
		<td class="col0">Engine bracket to block</td><td class="col1"><code>M10x1.5 @ 70mm (1) - - @ 75mm (1) - - M12x1.75 @ 130mm (1)</code> </td>
	</tr>
	<tr class="row9">
		<td class="col0">Power steering to block (bracket)</td><td class="col1"><code>M8x1.25 @ 75mm (2)</code> </td>
	</tr>
	<tr class="row10">
		<td class="col0">Power bracket to block ('00+)</td><td class="col1"><code>M8x1.25 @ 80mm (1) - - @ 25mm (2)</code> </td>
	</tr>
	<tr class="row11">
		<td class="col0">Oil filter bracket to timing cover</td><td class="col1"><code>5/16-18 @ 1.5" (4)</code> </td>
	</tr>
	<tr class="row12">
		<td class="col0">water pump bolts</td><td class="col1"><code>1/4-20 @ 1.125" (4) - - 5/16-18 @ 3" (4)</code> </td>
	</tr>
	<tr class="row13">
		<td class="col0">Cam sensor bolt</td><td class="col1"><code>1/4-20 @ 5/8" (1)</code> </td>
	</tr>
	<tr class="row14">
		<td class="col0">Flexplate to crank (auto trans cars)</td><td class="col1"><code>5/16-18 @ (1/2"?, 5/8"?, or 3/4"?) (8)</code> </td>
	</tr>
	<tr class="row15">
		<td class="col0">Flywheel to crank (manual trans only)</td><td class="col1"><code>5/16-18 @ 7/8" (8)</code> </td>
	</tr>
	<tr class="row16">
		<td class="col0">Pressure plate to Flywheel (manual trans only)</td><td class="col1"><code>M8x1.25 @ 22mm (6)</code> </td>
	</tr>
	<tr class="row17">
		<td class="col0">Oil level sensor thread size</td><td class="col1"><code>M20x1.5</code> </td>
	</tr>
	<tr class="row18">
		<td class="col0">Bellhousing bolts</td><td class="col1"><code>M12x1.75 @ ??</code> </td>
	</tr>
</table>
<span class='np_break'> </span>
</div>
</div>

<h4>Heads</h4>
<div class="level4">

<span class='np_break'> </span>
<div class="table sectionedit2"><table class="inline">
	<thead>
	<tr class="row0">
		<th class="leftalign">Location  </th><th class="col1">Thread Size, Length, and count</th>
	</tr>
	</thead>
	<tr class="row1">
		<td class="col0">Valve cover bolts</td><td class="col1"><code>1/4-20 @ 5/16"x5/8" shoulder (12)</code> </td>
	</tr>
	<tr class="row2">
		<td class="col0">Header to head bolts</td><td class="col1"><code>5/16-18 @ 1" (9x) - - @ 1.5" (3x)</code> </td>
	</tr>
	<tr class="row3">
		<td class="col0">engine lift bracket to block</td><td class="col1"><code>5/16-18 @ 5/8" (2)</code> </td>
	</tr>
	<tr class="row4">
		<td class="col0">Intake manifold to head bolts</td><td class="col1"><code>5/16-18 @ 1.125" (12)</code> </td>
	</tr>
	<tr class="row5">
		<td class="col0">EGR to manifolds</td><td class="col1"><code>M6x1 @ 25mm (2)</code> </td>
	</tr>
</table>
<span class='np_break'> </span>
</div>
</div>

<h4>Intake/Supercharger</h4>
<div class="level4">

<span class='np_break'> </span>
<div class="table sectionedit3"><table class="inline">
	<thead>
	<tr class="row0">
		<th class="leftalign">Location  </th><th class="col1">Thread Size, Length, and count</th>
	</tr>
	</thead>
	<tr class="row1">
		<td class="col0">Supercharger to LIM</td><td class="col1"><code>M8x1.25 @ 40mm (9) - - @ 60mm (1) - - @ 80mm (1)</code> </td>
	</tr>
	<tr class="row2">
		<td class="col0">SC snout to SC</td><td class="col1"><code>M8x1.25 @ 50mm (9)</code> </td>
	</tr>
	<tr class="row3">
		<td class="col0">Bracket to TB</td><td class="col1"><code>M6x1 @ 20mm (2)</code> </td>
	</tr>
	<tr class="row4">
		<td class="col0">PCV Cover to SC</td><td class="col1"><code>M6x1 @ 16mm (2)</code> </td>
	</tr>
	<tr class="row5">
		<td class="col0">Vac port to SC</td><td class="col1"><code>M6x1 @ 20mm (2)</code> </td>
	</tr>
	<tr class="row6">
		<td class="col0">SC bypass valve to SC</td><td class="col1"><code>M6x1 @ 16mm (2)</code> </td>
	</tr>
	<tr class="row7">
		<td class="col0">Vac Tee to SC</td><td class="col1"><code>M8x1.25 @ 20mm (2)</code> </td>
	</tr>
	<tr class="row8">
		<td class="col0">Fuel rail to SC</td><td class="col1"><code>M8x1.25 @ 10mm (1)</code> </td>
	</tr>
	<tr class="row9">
		<td class="col0">Fuel rail to Intake</td><td class="col1"><code>M6x1 nut (4) and stud</code> </td>
	</tr>
	<tr class="row10">
		<td class="col0">Thermostat cover</td><td class="col1"><code>M8x1.25 @ 30mm (2)</code> </td>
	</tr>
</table>
<span class='np_break'> </span>
</div>
</div>

<h4>Sensors and Electronics</h4>
<div class="level4">

<span class='np_break'> </span>
<div class="table sectionedit4"><table class="inline">
	<thead>
	<tr class="row0">
		<th class="leftalign">Location  </th><th class="col1">Thread Size, Length, and count</th>
	</tr>
	</thead>
	<tr class="row1">
		<td class="col0">Sensors to throttle body</td><td class="col1"><code>M4x0.7 @ 12mm (2) - - @16mm (4)</code> </td>
	</tr>
	<tr class="row2">
		<td class="col0">Ignition coil to control module</td><td class="col1"><code>M5x0.8 @ 45mm (6)</code> </td>
	</tr>
	<tr class="row3">
		<td class="col0">Cam sensor bolt</td><td class="col1"><code>1/4-20 @ 5/8" (1)</code> </td>
	</tr>
	<tr class="row4">
		<td class="col0">MAP sensor</td><td class="col1"><code>M5x0.8 @ 30mm (2 or 4)</code> </td>
	</tr>
	<tr class="row5">
		<td class="col0">Starter solenoid enable nut</td><td class="col1">M5x0.8 nut</td>
	</tr>
</table>
<span class='np_break'> </span>
</div>
</div>

<h4>Other Accessories</h4>
<div class="level4">

<span class='np_break'> </span>
<div class="table sectionedit5"><table class="inline">
	<thead>
	<tr class="row0">
		<th class="leftalign">Location  </th><th class="col1">Thread Size, Length, and count</th>
	</tr>
	</thead>
	<tr class="row1">
		<td class="col0">A/C bracket</td><td class="col1"><code>3/8-16 @ 2" (1)</code> </td>
	</tr>
	<tr class="row2">
		<td class="col0">Water pump pulley</td><td class="col1"><code>M6x1 @ 12mm (4)</code> </td>
	</tr>
	<tr class="row3">
		<td class="col0">LIM water cover</td><td class="col1"><code>M6x1 @ 20mm (2)</code> </td>
	</tr>
	<tr class="row4">
		<td class="col0">PCV cover</td><td class="col1"><code>M8x1.25 @ 16mm (2)</code> </td>
	</tr>
	<tr class="row5">
		<td class="col0">Heater hose elbow brackets</td><td class="col1"><code>M6x1 @ 16mm (2)</code> </td>
	</tr>
	<tr class="row6">
		<td class="col0">Evap Sensor bracket</td><td class="col1"><code>M6x1 @ 16mm (1)</code> </td>
	</tr>
	<tr class="row7">
		<td class="col0">EGR heat shield</td><td class="col1"><code>M6x1 @ 16mm (1)</code> </td>
	</tr>
	<tr class="row8">
		<td class="col0">Supercharger tensioner bracket</td><td class="col1"><code>3/8-16 @ 1.5" (1) - - @ 2" (1) - - @ 2.5" (1)</code> </td>
	</tr>
	<tr class="row9">
		<td class="col0">Main belt tensioner bracket</td><td class="col1"><code>3/8-16 @ 2.5" (3)</code> </td>
	</tr>
	<tr class="row10">
		<td class="col0">Passenger Side trans bracket</td><td class="col1"><code>3/8-16 @ 3/4" (2)</code> </td>
	</tr>
	<tr class="row11">
		<td class="col0">Altenator</td><td class="col1"><code>M10x1.5 @ 60mm (2)</code> </td>
	</tr>
	<tr class="row12">
		<td class="col0">A/C compressor to bracket</td><td class="col1"><code>M10x1.5 @ 60mm (3)</code> </td>
	</tr>
	<tr class="row13">
		<td class="col0">Lower SC idler pulley</td><td class="col1"><code>M10x1.5 @ 25mm (1)</code> </td>
	</tr>
</table>
<span class='np_break'> </span>
</div>
<p>
Most, if not all of this information has been gathered from <a href="http://www.pontiacbonnevilleclub.com/forum/viewtopic.php?f=8&t=44480&view=previous" class="urlextern" title="http://www.pontiacbonnevilleclub.com/forum/viewtopic.php?f=8&t=44480&view=previous" rel="ugc nofollow">Mattstrike's post on PBC</a>
</p>

<br/>

</div>

Enable Complex Tables Editor Height px Turn supplementary image paste support on

Edit summary: Minor changes

Please fill all the letters into the box to prove you're human. Q J F B P Please keep this field empty: