====== General Mechanical Specifications ======

All specs shown below have been pulled from a 98 Camaro service manual. L67 details will be checked and added later.

===== General specifications =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>Engine Type</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>90* V6</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>displacement</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>231 cubic inches</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>liters</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.8 L</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>RPO</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>L36</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>Bore</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>96.52 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.8 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>Stroke</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>86.36 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.4 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>Compression Ratio</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>9.4:1</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>Firing Order</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1-6-5-4-3-2</font>   ||

===== Lubrication System =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil capacity with oil filter change</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4.25 L</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4.5 qt</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil capacity without oil filter change</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.75 L</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4 qt</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil pressure @ operating temperature (1850 RPM) with 10w-30 oil</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>414 kPa</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>60 psi min</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil filter type</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>throw away element and can</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>gear pocket depth</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>11.71-11.75 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.461-0.4625 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>gear pocket diameter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>89.10-89.20 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.508-3.512 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>inner gear tip clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.152 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.006 in</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>outer gear diameter clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.203-0.381 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.008-0.015 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>end clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.025-0.089 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.001-0.0035 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve-to-bore clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.038-0.076 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0015-0.003 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>lubrication type</font>   | | |
|<font 11pt/Calibri,sans-serif;;black;;inherit>main bearings</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>pressure</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>connecting rods</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>pressure</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston pins</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>splash</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft bearing - front</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>splash</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft bearing - rear</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>pressure</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft bearings</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>pressure</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>timing chain</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>splash</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>cylinder walls</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>splash</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil pump type</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>gerotor</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil pressure sending uint</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>electrical</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil intake</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>stationary</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>oil filter system</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>full flow</font>   ||

===== Cylinders =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>cylinder bore diameter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>96.5 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.8 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>cylinder bore out-of-round maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0254 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0010 in</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>cylinder bore taper</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0254 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0010 in</font>   |

===== Pistons =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston clearance (39mm from top of piston)</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.010-0.051mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0004-0.0020 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring groove depth - top compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4.019-4.146 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.1580-0.1630 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring groove depth - 2nd compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4.214-4.341 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0166-0.1710 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring groove depth - oil control</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>3.814-3.941 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.1500-0.1550 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring end gap - top compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.305-0.559 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0120-0.0220 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring end gap - 2nd compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.762-1.016 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0300-0.0400 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring end gap - oil control</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.254-0.762 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0100-0.0300 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring side clearance - top compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.033-0.079 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0013-0.0031 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring side clearance - 2nd compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.033-0.079 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0013-0.0031 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring side clearance - oil control</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.023-0.201 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0009-0.0079 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring width - top compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.176-1.197 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0463-0.0471 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring width - 2nd compression</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.476-1.497 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0581-0.0589 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston ring width - oil control</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.854-2.007 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0730-0.0790 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston pin diameter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>21.9950-22.0000 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.8659-0.8661 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston pin clearance in piston</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0020-0.0130 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.00008-0.00051 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>piston pin fit-in-rod (clearance)</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0066-0.0217 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0003-0.0009 in.</font>   |

===== Crankshaft =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main journal diameter - all</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>63.470-63.495 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>2.4988-2.4998 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - rod journal diameter - all</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>57.1170-57.1475 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>2.2487-2.2499 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main journal taper - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0076 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0003 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - rod journal taper - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0076 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0003 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main journal out-of-round - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0076 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0003 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - rod journal out-of-round - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0076 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0003 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main bearing to journal clearance 1</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0178-0.0406 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0007-0.0016 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main bearing to journal clearance 2 and 3</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0254-0.0580 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0010-0.0020 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - main bearing to journal clearance 4</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0229-0.0457 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0009-0.0018 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - rod bearing clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0127-0.0660 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0005-0.0026 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>crankshaft - end play</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.076-0.276 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0030-0.0110 in.</font>   |

===== Connecting Rods =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>connecting rod - rod side clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.102-0.508 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0040-0.0200 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>connecting rod - connecting rod large end bore ID</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>60.295-60.312 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>2.37378-2.3745 in.</font>   |

===== Camshaft =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - journal diameter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>47.655-46.858 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.8462-1.8448 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - bearing inside diameter 1 and 4</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>46.970-46.934 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.8428-1.8492 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - bearing inside diameter 2 and 3</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>46.977-46.942 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.8481-1.8495 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - bearing to journal clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.041-0.119 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0016-0.0047 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - intake maximum lobe lift</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>6.55 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.258 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>camshaft - exhaust maxiumum lobe lift</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>6.48 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.255 in.</font>   |

===== Balance Shaft =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - end play</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0-0.171 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0000-0.0067 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - rear journal diameter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>38.085-38.105 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.4994-1.5002 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - radial play-front bearing clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0-0.026mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0000-0.0010 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - rear bearing to journal clearance</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0127-0.109 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0005-0.0043 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - drive gear lash</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.050-0.125 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0020-0.0049 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - bearing bore diameter - front</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>51.973-51.999 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>2.0462-2.0472 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - bearing bore diameter - rear, in block</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>47.584-47.612 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.8735-1.8745 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>balance shaft - bearing inside diameter - rear</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>38.118-38.194 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.5007-1.5037 in.</font>   |

===== Valve System =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>lifter</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>hydraulic</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>rocker arm ratio</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.6:1</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>face angle</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>45*</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>seat angle</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>45*</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>minimum margin</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.635 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.025 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>seat runout - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.050 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.002 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>seat width - intake</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.53-2.03 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.060-0.080 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>seat width - exhaust</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>2.29-2.79 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.090-0.110 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>stem height - all</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>49.15-50.17 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.935-1.975 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>stem clearance - all</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.038-0.089 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.0015-0.0032 in.</font>   |

===== Valve Springs =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - free length</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>499.78 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.960 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - load - closed</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>334 N @ 43.69 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>75 lb @ 1.72 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - load - open</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1014 N @ 32.4 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>228 lb @ 1.277 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - installed height</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>42.93-44.45 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>1.690-1.720 in.</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - number of active coils</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>4.48</font>   ||
|<font 11pt/Calibri,sans-serif;;black;;inherit>valve spring - number of total coils</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>6.6</font>   ||

===== Flywheel =====

|<font 11pt/Calibri,sans-serif;;black;;inherit>Application</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>Specifications</font>   ||
| ::: |<font 11pt/Calibri,sans-serif;;black;;inherit>metric</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>english</font>   |
|<font 11pt/Calibri,sans-serif;;black;;inherit>flywheel - runout - maximum</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.38 mm</font>   |<font 11pt/Calibri,sans-serif;;black;;inherit>0.015 in.</font>   |

\\